|
1 |
ip link add link DEVNAME name VLANNAME type vlan id VLAN-ID reorder_hdr on|off |
loose_binding on|off gvrp on|off ingress-qos-map FROM:TO egress-qos-map FROM:TO
|
1 2 3 4 5 6 |
#cat /etc/rc.local vconfig add eth0 418 ip l s up eth0.418 ip a a 192.168.168.21/24 dev eth0.418 ip r a default via 192.168.168.1 |
Here’s how to disable the protocol on a Red Hat-based system:
|
1 2 |
# sysctl -w net.ipv6.conf.all.disable_ipv6=1 # sysctl -w net.ipv6.conf.default.disable_ipv6=1 |
To re-enable IPv6, issue the following commands:
|
1 2 |
# sysctl -w net.ipv6.conf.all.disable_ipv6=0 # sysctl -w net.ipv6.conf.default.disable_ipv6=0 |
Here’s how to disable the protocol on a Debian-based machine. 1. Open a terminal window. 2. Issue the command sudo nano /etc/sysctl.conf 3. Add the following at the bottom of the file:
|
1 2 3 |
# net.ipv6.conf.all.disable_ipv6 = 1 # net.ipv6.conf.default.disable_ipv6 = 1 # net.ipv6.conf.lo.disable_ipv6 = 1 |
4. Save […]